- Overview of the OBD-II/MUT Project
- OBD-II EVO Connector Pin-Out
- ISO 9141-2 Protocol
- The JEFF cable
- Bench ECU for testing
- Prototype PCB PIC and JEFF Version 1.0 OBD-II
- Working !! U-OBD Cable Version 1.3 complete 06/01/2009
- Protoype Stand Alone Pic-Mut V1.2 Protoype 7/01/2009
- MUT Protocol
- Mut-Monitor V1.0 Test Program
- FREE test cables to Members
- Older versions of ECUFlash
- Mut 5 Baud Init Sequence and Request ID's
- Openport cable
- OpenPort Cable Version 1.2
- OpenPort Cable Version 1.3
- Different ISO Serial Chips
- Help on Tacho INPUT for ECU
- The Bench at the moment
- Mut-Monitor V1.1 Test Program Release 5/1/2009
- Mut Monitor V1.2 Second Release 5/1/2009
- L-Line may be needed for ABS and AYC
- ***Stupidly Fast** USB-PIC-OBD Version 1.1 Released 23/01/2009
- Mut Monitor V1.3 Release 10/1/2009
- Surface Mount SU-OBD Cable V1.0
- *****Mut-Monitor Now working with Tactrix OpenPort 2.0 cable*****
- Mut Monitor V1.5 Release 18/1/2009
- Mut Monitor V1.6 Release 20/1/2009
- EVO9 Bench ECU
- The cable has landed!
- Mut Monitor V1.7 Release 23/1/2009
- The ELM327 Programmer
- CAN Protocol for EVO X Diagnostics
- Mut Monitor V1.8 Release 27/1/2009
- Getting Protoype Cases Ready
- Mut Monitor V1.9 Release 31/1/2009
- Managed to Read ECU !
- MUT 'sniffer' ?
- I may have FINALLY figured out the code for diagnotics
- BlueMUT - MUT communication via BlueTooth
- Tactrix OpenPort 2.0 Re-Visited
- ***Cheap Cables tested with Mut-Monitor ***
- Vagcom FTDI Help
- ATmega-MUT
- 03/04/2009 Update
- Mut Monitor 1.9 problem, run time error '5'
- Mut Monitor Version 2.0 Released 12/04/2009
- Need info for create Autonomus MUT for Lancer X
- OpenPort 1.3 project 4 mitsubishi carisma
- What is the output of ECU
- iso 9141-2 standards
- OpenPort 2.0 schematic?
- Diagnostic mode and ABS system?
- MUT protocol
- Mitsi OBD ECU Tactrix cable schematics
- Mut Monitor v2.0 - ERROR 1002
- Base XML file